When to shock
When combined chlorine (total minus free) is above 0.5 ppm, when the water is green or cloudy, or after heavy use or a big rainstorm. A pool with healthy free chlorine and no combined chlorine doesn't need shocking on a schedule.
How high
Raise free chlorine to about 40% of your stabilizer reading, and at least 10 ppm. With stabilizer at 40 that's 16 ppm. Then hold it there: test every few hours and add chlorine to keep it at that level.
When it's done
Keep going until combined chlorine is 0.5 or lower, the water is clear, and free chlorine drops by 1 ppm or less overnight. Then let chlorine fall back to its normal target.
Swimming
Swim once free chlorine is back below 10 ppm. Brush the walls and run the filter continuously while shocking.
Chart
Liquid chlorine (12.5%) to shock a 20,000 gallon pool from 2 ppm, by stabilizer level.
| Stabilizer (CYA) | Shock level | 12.5% liquid chlorine (20,000 gal, from 2 ppm) |
|---|---|---|
| 0 ppm | 10 ppm | 1.25 gallons |
| 20 ppm | 10 ppm | 1.25 gallons |
| 30 ppm | 12 ppm | 1.5 gallons |
| 40 ppm | 16 ppm | 2.25 gallons |
| 50 ppm | 20 ppm | 3 gallons |
| 60 ppm | 24 ppm | 3.5 gallons |
| 80 ppm | 32 ppm | 4.75 gallons |
Computed by Pool Base's water engine. Confirm a large correction with a drop test before dosing.
Questions
How much shock does my pool need?
Enough to raise free chlorine to 40% of your stabilizer (at least 10 ppm). In 20,000 gallons with stabilizer at 40, going from 2 to 16 ppm takes about 2.25 gallons of 12.5% liquid chlorine.
How long after shocking can I swim?
When free chlorine is below 10 ppm, usually the next day.
Should I shock my pool every week?
Not by habit. Shock when combined chlorine is above 0.5, the water is cloudy or green, or after heavy use. Otherwise keep free chlorine at its target.