Skip to content
Pool Base

Chemistry

Water balance and the LSI, in plain terms

Water always wants to be balanced with calcium carbonate. If it holds too little, it takes calcium from plaster, grout and heaters. If it holds too much, it drops it as scale. The Langelier Saturation Index (LSI) tells you which way it's leaning.

6 min readUpdated October 22, 2026

Reading the number

LSI between -0.3 and +0.3 is balanced. Below -0.3 the water is corrosive: it etches plaster, pits metal and eats heater exchangers. Above +0.3 it's scale-forming: cloudy water, crusty tile lines and scale in heaters.

What moves it

Four things: pH, carbonate alkalinity, calcium hardness and temperature (plus a small effect from dissolved salts). Raising any of them raises LSI. pH has the biggest effect per step, which makes it the usual lever: within the 7.2 to 7.8 range, choose the pH that keeps LSI balanced.

Carbonate alkalinity is your total alkalinity minus the part stabilizer contributes, so a stabilized pool's real buffer is lower than its alkalinity reading.

Winter and spas

Cold water is more corrosive at the same readings; hot water scales more easily. That's why spas keep calcium lower, and why a plaster pool that's balanced in summer can need a higher pH or more calcium in winter.

Chart

LSI at 82°F with alkalinity 80 and stabilizer 40. Green cells are balanced.

pHCalcium 150Calcium 250Calcium 350Calcium 450Calcium 600
7.2−0.61−0.39−0.24 ✓−0.13 ✓−0.01 ✓
7.4−0.42−0.20 ✓−0.05 ✓+0.06 ✓+0.18 ✓
7.6−0.23 ✓−0.00 ✓+0.14 ✓+0.25 ✓+0.38
7.8−0.03 ✓+0.19 ✓+0.34+0.45+0.57

Computed by Pool Base's water engine. Confirm a large correction with a drop test before dosing.

Questions

What is a good LSI for a pool?

Between -0.3 and +0.3. Many plaster pool owners aim slightly positive, around 0 to +0.3, to protect the surface.

How do I raise my pool's LSI?

Raise pH within range, or raise calcium hardness if the pool is plaster. Raising alkalinity helps too. Warmer water also raises LSI.

Does LSI matter for vinyl pools?

Less. Vinyl isn't etched, but very corrosive water still attacks metal parts, heaters and ladders, and scaling water still clouds and coats tile.

Let the app work out the doses

Scan the strip, and Pool Base lists what to add, how much, and in what order, for that pool.

No card needed · Month to month · Cancel any time