The rule of thumb
Liquid chlorine is sold by 'trade percent': grams of available chlorine per 100 milliliters. That makes the math tidy. One gallon of 12.5% liquid chlorine raises 10,000 gallons by 12.5 ppm. One gallon of 10% raises it by 10 ppm. Unscented 8.25% bleach raises it by 8.25 ppm.
So to raise a 20,000-gallon pool by 3 ppm with 12.5% chlorine: 3 ÷ 12.5 × 2 = 0.48 gallons, a little under 2 quarts.
How high to raise it
Aim for about 15% of your stabilizer reading, never below 7.5% of it. With stabilizer at 40, raise free chlorine to 6 ppm, and don't let it drop under 3 before the next dose. Salt pools run lower (about 6.5% of stabilizer as a target) because the cell tops chlorine up all day.
Liquid chlorine or cal-hypo?
Liquid chlorine adds nothing else that stays in the water, which is why most pool professionals use it. Cal-hypo (calcium hypochlorite) adds about 0.7 ppm of calcium hardness for every 1 ppm of chlorine, which plaster pools can use but which builds scale over time. Dichlor adds about 0.9 ppm of stabilizer per 1 ppm of chlorine, useful when stabilizer is low and a problem when it isn't.
How to add it
Pour liquid chlorine slowly in front of a return jet with the pump running. Never mix it with acid, and never add both in the same spot or at the same time: wait 30 minutes after acid. Swim once free chlorine is back under 10 ppm.
Chart
12.5% liquid chlorine to raise free chlorine, by pool volume. Rounded to what you can measure.
| Pool size | +1 ppm | +2 ppm | +3 ppm | +5 ppm | +10 ppm |
|---|---|---|---|---|---|
| 5,000 gal | 5 fl oz | 10 fl oz | 15 fl oz | 26 fl oz | 1.5 quarts |
| 10,000 gal | 10 fl oz | 20 fl oz | 31 fl oz | 1.5 quarts | 3.25 quarts |
| 15,000 gal | 15 fl oz | 31 fl oz | 1.5 quarts | 2.5 quarts | 1.25 gallons |
| 20,000 gal | 20 fl oz | 1.25 quarts | 2 quarts | 3.25 quarts | 1.5 gallons |
| 25,000 gal | 26 fl oz | 1.5 quarts | 2.5 quarts | 1 gallon | 2 gallons |
| 30,000 gal | 31 fl oz | 2 quarts | 3 quarts | 1.25 gallons | 2.5 gallons |
| 40,000 gal | 1.25 quarts | 2.5 quarts | 3.75 quarts | 1.5 gallons | 3.25 gallons |
Computed by Pool Base's water engine. Confirm a large correction with a drop test before dosing.
Questions
How much liquid chlorine for a 10,000 gallon pool?
One gallon of 12.5% liquid chlorine raises 10,000 gallons by 12.5 ppm, so a 1 ppm raise takes about 10 fl oz, and 5 ppm takes about 51 fl oz, a little over 1.5 quarts.
How much chlorine for a 20,000 gallon pool?
To raise it by 3 ppm, about 0.48 gallons (61 fl oz) of 12.5% liquid chlorine. Double the gallons, double the dose.
Can I use household bleach in my pool?
Yes, if it's plain unscented bleach with no additives. 8.25% bleach is two-thirds the strength of 12.5% pool chlorine, so use about 1.5 times as much.