Soda ash: raises pH and alkalinity
Soda ash (sodium carbonate, sold as 'pH up') raises pH quickly and adds alkalinity at the same time. It's the right choice when alkalinity is also low. Pre-dissolve it in a bucket of pool water and pour it in slowly in front of a return; adding it fast clouds the water.
Borax: raises pH with less alkalinity
Borax raises pH while adding less alkalinity per step, and leaves borates that help hold pH steady. Useful when pH is low but alkalinity is already fine.
Aeration: raises pH for free
Point returns up at the surface, run waterfalls, spa jets or a fountain. Aeration lets carbon dioxide escape, which raises pH without changing alkalinity at all. It's slower than a chemical but costs nothing, and it's how you lower alkalinity too (acid down, air up).
Check alkalinity first
If alkalinity is low, raise it with baking soda first: baking soda also lifts pH a little, and often that's all the pH needed. Pool Base accounts for that before suggesting any soda ash.
Chart
Soda ash per 10,000 gallons to raise pH, at 82°F. Higher alkalinity takes more.
| Alkalinity | pH 7 → 7.4 | pH 7.2 → 7.5 | pH 7 → 7.6 | pH 7.3 → 7.6 |
|---|---|---|---|---|
| 60 ppm | 1 lb 1 oz | 9 oz | 1 lb 6 oz | 7 oz |
| 80 ppm | 1 lb 6 oz | 12 oz | 1 lb 13 oz | 10 oz |
| 100 ppm | 1 lb 12 oz | 15 oz | 2 lb 5 oz | 12 oz |
| 120 ppm | 2 lb 1 oz | 1 lb 2 oz | 2 lb 12 oz | 15 oz |
Computed by Pool Base's water engine. Confirm a large correction with a drop test before dosing.
Questions
How much soda ash to raise pH?
In 10,000 gallons at alkalinity 80, raising pH from 7.2 to 7.5 takes about three quarters of a pound of soda ash. The chart covers other cases.
Does baking soda raise pH?
A little. Baking soda mainly raises alkalinity. If alkalinity and pH are both low, raise alkalinity with baking soda first, then test pH again.
Why is my pool pH always low?
Chlorine tablets (trichlor) and dry acid lower pH over time, and low alkalinity lets it fall further. Keep alkalinity around 80 to 120 with tablets.