Skip to content
Pool Base

Dosing

How to lower pH in a pool, and why alkalinity changes the dose

Muriatic acid (or dry acid) lowers pH. The amount isn't a fixed 'ounces per 0.1', because alkalinity resists the change: the higher your alkalinity, the more acid every step takes. The chart shows how much it varies.

6 min readUpdated October 22, 2026

Why the same pH drop takes different amounts

Alkalinity is mostly bicarbonate, a buffer that soaks up acid. At alkalinity 120, lowering pH from 7.8 to 7.4 takes about one and a half times the acid it takes at alkalinity 80. And the lower pH goes, the stronger the buffer gets, so 7.5 to 7.2 takes more acid than 7.8 to 7.5. Stabilizer adds a little buffering of its own.

Pool Base works this out from the carbonate chemistry itself, using your alkalinity, stabilizer and water temperature, rather than a flat rule.

Add it in parts

Add no more than about 16 fl oz of 31.45% acid per 10,000 gallons at a time. Pour slowly into the deep end, close to the water, with the pump running. Wait 30 minutes, test, and add the rest if pH is still high. Strips read to the nearest chart color, so confirm a big correction with a drop test first.

If pH keeps coming back up

pH that climbs every week usually means alkalinity is too high, or there's a salt cell or a lot of aeration (waterfalls, spa spillovers) driving carbon dioxide out. Lower alkalinity with acid and aeration (see the alkalinity guide) and pH holds steadier.

Safety

Wear gloves and eye protection. Always add acid to water, never water to acid. Never mix acid with chlorine or add them together. Store them apart.

Chart

31.45% muriatic acid per 10,000 gallons, at 82°F with no stabilizer. More alkalinity, more acid.

AlkalinitypH 7.8 → 7.5pH 7.8 → 7.4pH 8 → 7.5pH 8.2 → 7.6pH 7.6 → 7.2
60 ppm5 fl oz7 fl oz7 fl oz7 fl oz10 fl oz
80 ppm6 fl oz9 fl oz9 fl oz9 fl oz13 fl oz
100 ppm8 fl oz11 fl oz11 fl oz11 fl oz17 fl oz
120 ppm9 fl oz14 fl oz13 fl oz13 fl oz20 fl oz
150 ppm12 fl oz17 fl oz17 fl oz16 fl oz25 fl oz

Computed by Pool Base's water engine. Confirm a large correction with a drop test before dosing.

Questions

How much muriatic acid to lower pH in a 10,000 gallon pool?

It depends on alkalinity. At alkalinity 80, taking pH from 7.8 to 7.5 takes roughly 6 to 7 fl oz of 31.45% acid; at alkalinity 120, about 9. The chart has more cases.

How long after adding muriatic acid can you swim?

About 30 minutes with the pump running, once you've tested and pH is between 7.0 and 8.0.

Is dry acid the same as muriatic acid?

Both lower pH and alkalinity. Dry acid (sodium bisulfate) is easier to handle but adds sulfates that build up over time. About 1 lb of dry acid does the work of 12 fl oz of 31.45% muriatic acid.

Let the app work out the doses

Scan the strip, and Pool Base lists what to add, how much, and in what order, for that pool.

No card needed · Month to month · Cancel any time