Target by surface
Plaster, pebble, quartz and concrete: 250 to 450 ppm. Vinyl and fiberglass: 150 to 350. Spas: 150 to 250, since hot water scales more easily.
Raising it
Calcium chloride raises it: about 1.2 lb of 77% flake per 10 ppm in 10,000 gallons. Dissolve it in a bucket of pool water first (it gets hot), pour slowly around the deep end, and don't add it within 4 hours of soda ash or baking soda or the water can cloud. Raise it no more than about 100 ppm a day.
Lowering it
No chemical takes calcium out. The fix is replacing part of the water with fill water that's lower in calcium. To bring 600 down to 350 with fill water near zero, replace about 40% of the pool. Test your tap water first; in hard-water areas it may be high already.
Strips usually read total hardness (calcium plus magnesium). Calcium alone is usually a little lower.
Chart
Calcium chloride (77% flake) to raise calcium hardness, by pool volume.
| Pool size | +25 ppm | +50 ppm | +100 ppm | +150 ppm |
|---|---|---|---|---|
| 5,000 gal | 1 lb 8 oz | 3 lb | 6 lb | 9 lb |
| 10,000 gal | 3 lb | 6 lb | 12 lb | 18 lb |
| 15,000 gal | 4 lb 8 oz | 9 lb | 18 lb | 27 lb |
| 20,000 gal | 6 lb | 12 lb | 24 lb | 36 lb |
| 25,000 gal | 7 lb 8 oz | 15 lb | 30 lb | 45 lb |
| 30,000 gal | 9 lb | 18 lb | 36 lb | 54 lb |
| 40,000 gal | 12 lb | 24 lb | 48 lb | 72 lb |
Computed by Pool Base's water engine. Confirm a large correction with a drop test before dosing.
Questions
What is the ideal calcium hardness for a pool?
250 to 450 ppm for plaster, pebble and concrete pools; 150 to 350 for vinyl and fiberglass; 150 to 250 for spas.
How do I lower calcium hardness in my pool?
Partly drain and refill with lower-calcium water. There's no chemical that removes calcium.
Does a vinyl pool need calcium?
No. Low calcium won't hurt vinyl. Keep it under about 350 so it doesn't scale.