Skip to content
Pool Base

Testing

How to read pool test strips accurately

Test strips are quick and good enough for most decisions, if you read them the way the bottle intends. Most bad readings come from timing, light, or comparing against the wrong chart.

5 min readUpdated October 22, 2026

Dip and time it

Dip the strip about 18 inches below the surface for the time the bottle says (often 2 seconds), take it out without shaking it, and hold it level. Read it at the time the bottle gives, usually around 15 seconds. Colors keep changing after that, and some pads (pH, chlorine) change faster than others.

Read it in the right light

Daylight in the shade is best. Direct sun washes colors out, and indoor or warm lighting shifts them. Hold the strip right against the chart, not at arm's length.

Use your own bottle's chart

Charts change between revisions of the same product, and pads printed on one bottle aren't always the same as another brand's. Always read against the chart on the bottle the strips came from. Strips also fade with heat and humidity: keep the lid closed and replace them after the date on the bottle.

When to use a drop test instead

A strip reads to the nearest color on the chart. Before a large correction (a big acid dose, a drain, a shock), confirm the reading with a drop test kit or a photometer.

Scanning strips with a phone

Pool Base reads a photo of the strip: it finds the pads, corrects the light using the strip's own white, and matches each pad to the chart. You can photograph your own bottle's chart so strips are read against exactly the colors printed on it, and it says when a pad isn't on the chart at all, rather than guessing.

Questions

How long do you wait to read a pool test strip?

Whatever the bottle says, usually about 15 seconds. Reading late shifts colors, especially pH and chlorine.

Are pool test strips accurate?

To the nearest color on the chart, if they're fresh and read correctly. For big corrections, confirm with a drop test.

Why do my test strips read differently from the pool store?

Often timing, light, an expired bottle, or a different chart revision. Stores usually use a photometer, which is more precise.

Let the app work out the doses

Scan the strip, and Pool Base lists what to add, how much, and in what order, for that pool.

No card needed · Month to month · Cancel any time